Generalized Jacobi spectral Galerkin method for fractional pantograph differential equation

This work is concerned with the extension of the Jacobi spectral Galerkin method to a class of nonlinear fractional pantograph differential equations. First, the fractional differential equation is converted to a nonlinear Volterra integral equation with weakly singular kernel. Second, we analyze the existence and uniqueness of solutions for the obtained integral equation. Then, the Galerkin method is used for solving the equivalent integral equation. The error estimates for the proposed method are also investigated. Finally, illustrative examples are presented to confirm our theoretical analysis.     

Horizontal convection in a rectangular enclosure driven by a linear temperature profile

The horizontal convection in a square enclosure driven by a linear temperature profile along the bottom boundary is investigated numerically by using a finite difference method. The Prandtl number is fixed at 4.38, and the Rayleigh number Ra ranges from107 to 1011. The convective flow is steady at a relatively low Rayleigh number, and no thermal plume is observed, whereas it transits to be unsteady when the Rayleigh number increases beyond the critical value. The scaling law for the Nusselt number Nu changes from Rossby's scaling Nu ～ Ra~(1/5) in a steady regime to Nu ～ Ra~(1/4) in an unsteady regime, which agrees well with the theoretically predicted results. Accordingly,the Reynolds number Re scaling varies from Re ～ Ra~(3/11) to Re ～ Ra~(2/5). The investigation on the mean flows shows that the thermal and kinetic boundary layer thickness and the mean temperature in the bulk zone decrease with the increasing Ra. The intensity of fluctuating velocity increases with the increasing Ra.     

Hybrid control strategy of delayed neural networks and its application to sampled-data systems: an impulsive-based bilateral looped-functional approach

Nonlinear Dynamics - In this work, the problem of hybrid control strategy for delayed neural networks is investigated via an impulsive-based bilateral looped-functional (IBBLF) approach. Firstly, a...     

Hosoya and Merrifleld-Simmons Indices in Random Polyphenyl Chains

Acta Mathematicae Applicatae Sinica, English Series - The Hosoya index of a graph is the total number of matchings in it. And the Merrifleld-Simmons index is the total number of independent sets in...     

加强型Bi-2212超导股线有限元拉伸性能分析

为探究加强型Bi-2212超导股线的力学性能以及不锈钢包带对超导股线力学性能的影响，运用Ansys软件建立加强型Bi-2212超导股线的三维模型，采用有限元分析方法，对其机械结构进行仿真，模拟高温高压热处理后轴向受拉形变量和应力应变分布情况。仿真结果显示，在同样施加100 N拉力的情况下，与超导原线（Bi-2212超导线）相比，密绕Ni₈₀Cr₂₀包带后的加强型Bi-2212超导股线轴向受拉形变程度减小，约10%;应力应变均降低，约30%。采用Ni₈₀Cr₂₀作为外包带制成的加强型Bi-2212超导股线力学性能显著，是未来超导线发展方向之一。     

A new direct band gap silicon allotropeο-Si32

Silicon is a preferred material in solar cells,and most of silicon allotropes have an indirect band gap.Therefore,it is important to find new direct band gap silicon.In the present work,a new direct band gap silicon allotrope of o-Si32 is discovered.The elastic constants,elastic anisotropy,phonon spectra,and electronic structure of o-Si32 are obtained using first-principles calculations.The results show that o-Si32 is mechanically and dynamically stable and is a direct semiconductor material with a band gap of 1.261 e V.     

Three-weight linear codes from Weil sums

Journal of Algebraic Combinatorics - By appropriately choosing a defining set, we define a class of linear codes and establish their complete weight enumerators and weight enumerators using Weil...     

蛋白质-多糖复合体系在活性物质传递中的应用

蛋白质-多糖复合体系作为生物活性物质传递系统的壁材,有着人工合成聚合物或无机物等其他材料不可比拟的多重优势。本文就蛋白质和多糖之间的连接方式及蛋白质-多糖复合体系形成传递系统的多种形式进行了综述,以及对此领域的发展趋势进行了展望。结合蛋白质和多糖的结构特点,二者之间的链接方式分为非共价结合的物理共聚,和共价结合的美拉德偶联、化学交联、酶催化交联等方式,文中分别对各种连接方式的原理和机理,以及其影响因素做了深入阐述。以蛋白质-多糖复合体系为壁材对活性物质的传递形式大体上分成乳化系统、胶束、纳米凝胶、分子复合物以及壳核结构等系统。不同的活性物质的特征和传递需求,可针对性地选择合适结构的蛋白质和多糖种类以及二者的连接方式和传递系统的形式。并且,随着研究的逐步发展和推进,此领域的发展趋势朝着智能化和靶向性的方向进行。目前活性物质的蛋白质-多糖复合体系的传递系统,还依然面临着系统设计、评价和应用等多方面的挑战,这就要求我们在更全面更深入了解认识其对活性物质影响和功效的基础上,安全合理地设计和深入细致地评价活性成分的传递系统。     

Adsorption of Th(IV) from aqueous solution by the graphene oxide nanoribbons/chitosan composite material

Journal of Radioanalytical and Nuclear Chemistry - In order to reduce the potential toxicity to the environment after treatment of radioactive waste water, an eco-friendly graphene oxide...     

胶体晶体自组装常用方法的研究进展

胶体自组装是制造大面积胶体晶体的高效方法,对制备各种功能胶体晶体材料具有十分重要的意义,在微纳制造、新材料、能源、医学等领域有巨大的应用潜力.对胶体自组装过程中涉及的各种作用力进行了详细分析,归纳了胶体晶体自组装的基本方法.面向制造大面积胶体晶体,阐述了几类代表性的新型胶体晶体自组装方法,包括温度辅助、模板辅助、表面活性剂辅助、旋涂法与界面转移相结合等,分析了不同方法的影响因素、优缺点和未来的改良方向,并介绍了在完整单层膜基础上制造三维胶体晶体的工艺方法.为提高胶体晶体制造质量和效率、拓宽胶体自组装技术的应用提供必要参考.